Mantener limpia la malla del filtro de entrada es fundamental para garantizar un flujo constante de material y evitar problemas en tu equipo de aplicación. En este Consejo Técnico, Carlos y José explican la importancia de la limpieza regular de la malla del filtro y cómo esta práctica simple puede prevenir obstrucciones, proteger tu sistema y mejorar el rendimiento general. A lo largo del video, comparten recomendaciones prácticas desde el campo, incluyendo cuándo revisar el filtro, cómo limpiarlo correctamente y qué señales indican que podría estar afectando tu operación. Este tipo de mantenimiento preventivo ayuda a reducir tiempos de inactividad, mejorar la calidad de aplicación y prolongar la vida útil de tu equipo. En Accufoam, estamos comprometidos en brindar no solo productos de alto desempeño, sino también el conocimiento y soporte técnico que necesitas para trabajar de manera más eficiente. ¿Tienes preguntas o quieres ver más consejos técnicos? Déjalos en los comentarios.

Your spray foam rig is only as good as the data you can trust—and that starts with the right tools. In this Tech Tips with Abel episode, Abel breaks down why an amp clamp multimeter is a must-have for every contractor in the field. From monitoring electrical draw to diagnosing equipment issues before they turn into downtime, Abel walks through how this essential tool helps you keep your rig running efficiently and safely. Whether you’re checking heaters, proportioners, or generators, understanding your electrical system is key to consistent performance and avoiding costly mistakes. This is real, hands-on guidance from the field—designed to help you work smarter, troubleshoot faster, and stay ahead on every job. At Accufoam, we’re committed to supporting contractors with more than just materials. It’s about the knowledge, training, and tools that keep you moving. Have questions or want to see more tech tips? Let us know in the comments.

Las mangueras de pulverización están expuestas constantemente a superficies abrasivas, lo que puede provocar desgaste prematuro, daños y costos innecesarios. En este Consejo Técnico, Carlos y José analizan diferentes opciones de protectores antirozaduras y cómo pueden ayudarte a proteger uno de los componentes más importantes de tu equipo. A lo largo del video, explican los distintos tipos de materiales, métodos de instalación y qué soluciones funcionan mejor según el entorno de trabajo. También comparten recomendaciones prácticas desde el campo para extender la vida útil de tus mangueras, reducir tiempos de inactividad y mantener un rendimiento constante en cada aplicación. En Accufoam, sabemos que no se trata solo del producto, sino de brindar soluciones reales que mejoren la eficiencia y durabilidad de tu operación. ¿Tienes preguntas o quieres más consejos técnicos? Déjalos en los comentarios.

Understanding how materials move through your system is key to dialing in consistent spray performance. In this Tech Tip, Aaron provides a general overview of fluid dynamics and how it directly impacts your spray foam setup—from the proportioner to the hose and out through the gun. Aaron breaks down core concepts such as pressure, flow rate, viscosity, and temperature, and explains how each plays a role in achieving proper mixing, spray pattern, and overall foam quality. Whether you’re troubleshooting inconsistencies or looking to improve efficiency on your rig, having a solid grasp of these fundamentals can make all the difference in the field. At Accufoam, we’re committed to helping contractors build both skill and confidence through practical, real-world education that translates directly to better results on the job. Have questions or topics you want us to cover next? Drop them in the comments.

Dialing in the right processing temperatures is critical to achieving consistent spray performance—and having that information clearly visible on your rig makes all the difference. In this video, we introduce our Suggested Processing Temps stickers for proportioners, designed to give contractors a quick, reliable reference right where they need it. These stickers provide recommended temperature ranges at a glance, helping you set up faster, reduce guesswork, and maintain proper material performance throughout the job. Whether you’re training new crew members or keeping experienced operators aligned, having standardized guidance on your equipment helps improve consistency and efficiency across every project. At Accufoam, we’re focused on delivering practical tools that support contractors in the field—because small details can make a big impact on overall results. Need a set for your rig or have questions about dialing in your temps? Reach out to our team—we’re here to help.

Choosing the right transfer pump can have a major impact on your spray foam operation. In this Tech Tip, Aaron and Abel break down the key differences between pneumatic and electric transfer pumps—and how each option performs in real-world conditions. From power requirements and portability to maintenance, consistency, and jobsite flexibility, they walk through the pros and considerations of each system so you can make the best decision for your setup. Whether you’re running a mobile rig or optimizing a more permanent operation, understanding how your transfer pump affects material flow and overall efficiency is critical. This is practical, field-tested insight designed to help you reduce downtime, improve performance, and keep your jobs moving. At Accufoam, we’re here to support contractors with the knowledge, tools, and technical guidance needed to get the most out of every system. Have questions or want help selecting the right setup? Our team is ready to help.

Your spray hose takes a beating on every job—dragging across roofs, concrete, and tight job sites can quickly lead to wear, damage, and costly replacements. In this Tech Tip with Abel and Carlos, the team breaks down different spray hose scuff guard options and how they help protect one of the most critical components of your rig. From material types to installation methods, Abel and Carlos walk through practical solutions that extend hose life, reduce downtime, and keep your operation running smoothly. They also share insights from the field on what works best in different environments, so you can choose the right level of protection for your setup. At Accufoam, we know it’s not just about performance—it’s about durability, efficiency, and supporting contractors with real-world solutions that make a difference on every job. Have questions or want help dialing in your setup? Our team is here to support you.

When spray foam isn’t mixing properly in your gun's chamber, it can lead to inconsistent performance, material waste, and costly downtime. In this video, Aaron, one of Accufoam’s experienced technicians, breaks down the most common causes behind poor mixing at the gun—and what you can do to fix it. Starting with the gun, Aaron walks through the key factors that impact spray quality in the field. He also shares practical troubleshooting tips to help you quickly identify the issue, get your equipment back on track, and maintain consistent foam performance. At Accufoam, we’re committed to supporting contractors beyond the product—through hands-on training, real-world expertise, and on-site technical support that keeps your jobs running efficiently. Have questions or need support? Our tech team is here to help.

In this episode of Tech Tips with Abel, we break down air compressor start-up and maintenance best practices to help spray foam contractors protect their equipment, avoid downtime, and keep jobs running smoothly. Abel walks through key steps to properly start your air compressor, what to check before and after operation, and routine maintenance habits that can extend the life of your system. Whether you’re new to the rig or a seasoned applicator, these fundamentals matter when it comes to performance, consistency, and safety in the field.